Tweet
Hello, I am completely failing to do a 3D construction using 3DF Zephyr. I generated about 120 photos by sitting in a rotating chair and fixing a camera, then taking about 40 shots as I rotated. I then repeated the process with the camera in a low position (looking up at me) and a high position (looking down on me. So, the cameras should be in 3 circles around my head (the subject). Nevertheless this is not at all happening as you can see from the result below:
[img src="https://i.stack.imgur.com/lXFHi.jpg" alt="camera positioning" /]
As you can see from the image all the cameras are clustered on a single axis, not arranged in a circle.
How can fix this problem?
The keymap generation was done with the High quality, Human Body settings. The pictures are high resolution jpegs taken with a Nikon D200 which the software correctly recognized and calibrated for.
[img src="https://i.stack.imgur.com/lXFHi.jpg" alt="camera positioning" /]
As you can see from the image all the cameras are clustered on a single axis, not arranged in a circle.
How can fix this problem?
The keymap generation was done with the High quality, Human Body settings. The pictures are high resolution jpegs taken with a Nikon D200 which the software correctly recognized and calibrated for.
Comment