Beginner with turntable issues on free version (testing to get Lite)

[JavierM]

[jupp2000]

[JavierM]

Thanks jupp2000!
I will try some of that stuff and see if I can improve my results.

[Andrea Alessi]

Hi Javier,

I suggest you zoom in more or get closer to your subject - it is currently framed in a way where about 1/9 of the image is wasted. Try also to use a tripod (if not already) so you can have a longer exposure time with a better depth of field (e.g. 1s f/12 or something similar) so you can capture more light. this should give zephyr enough information to actually close the loop: i suspect the side is what's the problem as it's probably a tiny, small featureless "blob".

Adding more photos could help, consider doing multiple orbits. We have a free 14 days trial of lite (no registration required) you can download from https://www.3dflow.net/3df-zephyr-ev...download-page/

If you want to share the photos, I'll be happ yto have a look, but I would consider a reshoot if possible

[JavierM]

Thanks Andrea.
I will try to find some time next week for a reshoot and improve my results. Might give a try to the lite trial too.